Rubicon Stage 3 Kit Pre-Order
This Giant Kit will give you a direct fit Link Kit from Rock Beach Customs, for your Axial Rubicon JK 4door, Ram or Honcho build, using a 313mm wheelbase and Axial SCX axles. The result will be all steel links, with tight Traxxas #5347 Rod ends all around, as well as a full 4 Link rear and 3 Link Panhard front with a chassis mounted servo! A total suspension and steering upgrade Kit!
You get the GCM Rear Truss, GCM Front 3Link Truss, GCM Panhard kit, Front Servo Bumper Mount, and Rock Beach Customs Links for the Panhard, Servo Link, and Steering cross link! You ALSO will recieve the GCM front Motor/Trans mount for the SCX as well as a GCM Transfer Case.
The kit will require you to install the links as replacements for your plastic or axial link kits, as well as the front and rear Truss parts, and install the Panhard Kit. The Motor/Trans mount requires the flipping of your front shock towers, and installation of the mount. The transfer case will require Assembly and installation also.
Check out this video here for the full assembly of this product and tech notes:
Complete Assembly instructions and videos:
Stage 2 Video, links and Panhard and Steering Servo here at this link
Stage 3 Video, Motor mount and T-Case installation COMING SOON
Each Kit comes with the following:
GCM Rear Axle Truss
GCM Front Axle Truss
GCM Servo Bumper Mount
GCM Panhard Kit
GCM Front Motor/Trans mount
GCM Transfer Case Kit
Rock Beach Customs Links:
Steering Servo Drag Link x 1
Steering Tierod Link x 1
Front 3Link Upper x 1
Front Bent Panhard x 1
Front Lower Links x 2
Rear Upper 4 Links x 2
Rear Lower Links x 2
All Hex hardware required is included
--You will require the 'intermediate shaft' from the trans to the T-Case which measures a maximum of 105mm total length.--
If your Transfer Case is too tight after assembly, knock the end of the shaft with a quick tap on all 3 shafts. This works GREAT to seat the bearings in the case.
All Tube links are made of steel threads and steel tubes from Rock Beach Customs. All are bare steel finish. Rod end replacements are Traxxas #5347
